Your position: > Products > Governor > ESC series >
ESC5522 Generator governor

ESC5522 Generator governor

  • publish: 2014-03-16 09:02      Browse:
  • Type:     ESC5522
  • Product Summary:
  •       The ESC5522 series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes. The ESD5522E /5525Series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes. (ESC5520E is designed for CUMMINS EFC series.) ...

Introduce
Product:
User manual:
Software Download:

Product Description:

The ESC5522 series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.  

The ESD5522E /5525Series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.   (ESC5520E is designed for CUMMINS EFC series.) 

Isochronous Operation/Steady Stability---- +/-0.25%

 or better Supply----12 or 24 VDC Battery Systems(transient&reverse voltage protected) 

Power Consumption----50 ma continuous plus acutator current 

Maximum Actuator Current at 25celsius (77celsius F)----10 Amps continuous 


Main features:

1、 the whole design of the closed loop control;

2、 installation is simple and can be adjusted in advance;

3、 work rate and idle speed is adjustable, to help is used for more than one machine or special purpose machine input;

4、 the actuator fault and in the case of losing speed sensor signals or power supply safety protection, etc.;

5、 start with a smooth speed control board (SMD components);

6、 increases the overspeed protection, than the average speed control board + overspeed protection board more reliable、 safe.


Specifications:

Input      Supply:12 or 24 VDC Battery System (Transient and Reverse Voltage)

       Polarity:Negative Ground (Case Isolated)

       Power Consumption:50 ma continuous plus actuator current

       Actuator Current Range @ 25 Deg. C - (Inductive Load):Min.2.5 Amps; Max. 10Amps continuous

       PID:PID parameter is different with ESD5500

              Speed Sensor Signal:0.5-120 Volts RMS

Performance Isochronous Operation/Steady State Stability:±0.25% or better

     Speed Range/Governor:1K to 7.5K Hz continuous

     Speed Drift with Temperature:±1 Max

     Idle Adjust CW:60% of set speed

     Idle Adjust CCW:Less than 1200 Hz.

     Droop Range:1-5% regulation

     Droop Adj. Max.: (K-L Jumpered)400 Hz., ±75Hz. Per 1.0A change

     Droop Adj. Min.: (K-L Jumpered)15Hz., ±6Hz. Per 1.0A change

     Speed Trim Range:±200 Hz

     Remote Variable Speed Range:500 - 7.5 Hz. Or any part there of

     Terminal Sensitivity J:100 Hz., ± 15Hz / Volt @ 5.0 K Impedance

     Terminal Sensitivity L:735 Hz., ±60 Hz / Volt @ 65 K Impedance

     Terminal Sensitivity N:148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance

     Terminal Sensitivity P:10 VDC Supply @ 20 ma Max

EnvironmentalAmbient Operating Temperature Range:-40 to +85 Deg. C

    Relative Humidity:Up to 95%

    All Surface Finishes:Fungus Proof and Corrosion Resitant

ReliabilityVibration:1G at 20 to 100 Hz.

    Testing:100% Functionally Tested


More
Dongguan Tuancheng automation equipment Co., Ltd. all rights reserved.
Sales Phone: 86-769-23162896 Fax:86-769-23162896-609、23166296